Pi-Star DMR Configuration - DMR+ Network: Options

Pi-Star DMR Configuration
DMR+ Network: Options

Configuration ::
DMR+ Master – Choose a nearby master server.

DMR+ Network – Set up any options you want to use 1.

Note 1: If you don't want to auto-connect to a talkgroup (when Pi-Star is set up as a hotspot),

use: StartRef=4000;RelinkTime=60;UserLink=1;TS1_1=9;

Note 2: If you turn off DMR Mode via MMDVMHost Configuration, these options aren't saved.

When you turn on DMR Mode again with DRM+ or DMRGateway set as the DMR Master, you'll need to re-enter these options.

Pi-Star NXDN is OFF Line

My Pi-Star shows Green [Mode Enabled] but Red under [Network Status]

Please wait for CODING CHANGES -  PISTAR and NXDN is under development March / April 2018

Pi-Star NXDN is OFF Line

RX NXDN but NO TX

I hear RX NXDN users but it doesn’t hear my transmissions.
Before I mess with RxOffset I think this is a issue that needs attention first.

ANSWER ::

Change the RxOffset setting adjust 

Updates and Changes to Jessie Pi-Star

Updates and Changes to Jessie Pi-Star

Andrew Taylor
Admin · March 17 at 8:39am

With the release of the Pi3 B+ there have been a number of changes to Stretch to support the new board, those changes have not (yet) propagated to Jessie (Pi-Star 3.x is based on Jessie).

However I know a number of you already have Pi 3B+ boards, so I have made a custom image to support these, the kernel is *not* upgradable on this image, please keep that in mind if you choose to use it.

Pi-Star v4.x is built on Stretch, it will support these boards better and apart from a passing resemblance to the current chain, its a very different animal - I hope this beta build will keep you going until we can get 4.x out of the door.

removed raspi-config

removed raspi-config

It was removed long ago

Setup WPA over SSH

How-To for setting up WPA over SSH, for those times when the Web Portal just won't work out for you....

1. SSH into your Pi, using the username of 'pi-star' and either the default password of 'raspberry' or your own password if you changed it on the dashboard.

PI-STAR mobile Free Hotspots

PI-STAR mobile Free Hotspot

My solution for using pi-star at mobile FREE wifi mobile hotspots while travelling

Understood when travelling and maybe using free wifi to connect a hotspot.

Outlined is an example of how to transfer the "wpa_supplicant.conf" file with wifi setting onto a SDcard and moved to the hotspot device.  To activate that device on free wifi ie.coffee shop.

JumboSpot Pi-star Settings

JumboSpot Pi-star Settings

I have acquired a Jumbo Spot 17 board to try on Pi Star, there is a sticker on it saying RXOFFSET=500 TXOFFSET=500
P25 OFFSET=+200.

I have put the 500 offset in RX and TX in MMDVM Host in expert mode, but what is the P25 offset referring to ?

It doesn't say TX or RX, there is another RXD and TXD offset setting, does it refer to this I wonder.

Pi-Star Users Support Group

Pi-Star Users Support Group
https://groups.io/g/PiStar

https://groups.io/g/PiStar

Setup URL for Pi-Star Public Digital Voice Dashboard for

Setup URL for Pi-Star Public Digital Voice Dashboard for
Setup website Pi-Star Digital Voice Dashboard.

So the question was how do you setup the public URL interface for the PI-Sar dashboard ?

Pi-Star Digital Voice Dashboard for VE3WZW
www.ve3wzw.net/2018/01/pi-star-digital-voice-dashboard-for.html
4 Pi-Star Hotspots are shared, URL as follows ;

more examples; 
MB6HU - http://norfnet.homelinux.net/
VA3TWT - http://va3iba.no-ip.org/
SA7BIK - http://sa7bik.se/

Pi-Star Users Support Group
https://groups.io/g/PiStar

Pi-Star Presentation

Pi-Star Presentation

How To ssh Into pi-star Hotspot

How To ssh Into pi-star Hotspot

Pi-Star Expert Editor pages

Pi-Star Expert Editor pages

Enable RSSI.dat data available for MMDVM in all mode

Enable RSSI.dat data available for MMDVM in all mode

How to connect a headless Raspberry Pi at coffee shops

How to connect a headless Raspberry Pi at coffee shops?

I want to develop my Pi project at various coffee shops around town. Given a laptop and headless Pi, how can I get networking setup? I'm assuming I need to connect the Pi to the coffee shop network, but how do I do that without a monitor connected to the Pi?

I have a couple of ideas, including: - modifying a noobs image on the spot on the laptop (but I'm not sure what will happen when the network asks the Pi to "accept" their terms and conditions) - use Bluetooth to connect to the Pi and set up the network settings through that

How have others solved this? Any ideas are most appreciated!

Pi-Star Digital Voice Interface - Expert Editor

Pi-Star Digital Voice Interface - Expert Editor
Local Network -  http://pi-star/admin/expert/edit_dmrgateway.php
SEE the full list - Andy 's website : http://pistar.ca

AIRSECURITY Brandmeister Setup
AirSecurity is supported on Pi-Star, this uses the login from your radio.
HotSpot security is not yet supported.

Headless Raspberry Pi Setup

Headless Raspberry Pi Setup

Don’t have an extra keyboard or HDMI cable? Here’s how to do a headless Raspbian install on your Pi.

Step 2. Write Image to SD Card

Write the image to SD card. You can find detailed instructions here.

ircddbremote control pi-star

ircddbremote control pi-star

Setup URL Pi-Star Digital Voice Dashboard for on a domain

Setup URL Pi-Star Digital Voice Dashboard for on a domain

Here are some basic instructions:
Optionally, if you want a domain name, rather than entering an IP address, you need to buy a domain name from someone. There are tons of places to buy one from. 

I mostly used 

DStar on the Pi Star image

DStar on the Pi Star image