Hotspot PI-STAR RF Power Level
I have a mmdvm open spot and it has a hidden antenna built inside the box. It turned out I could use my HT with 0.5 W 200 meters away!
So I got inside the expert menu, and tuned down the "RFLevel" from 100 to 10. After the change, the communication is satisfactory in my apartment with reduced EMF.
your lan ip here:
http://192.168.1.xxx/admin/expert/edit_mmdvmhost.php
- configuration
- admin
- expert
Hotspot PI-STAR RF Power Level
Configuration>Expert>MMDVMHost>RFLevel
Default is 100, I set mine to 10 which is approximately 1milliwatt and works fine in my application.
Default is 100, I set mine to 10 which is approximately 1milliwatt and works fine in my application.
Important :: I’ve notice the changes take place after a reboot.
Hotspot PI-STAR RF Power Level
Configuration>Expert>MMDVMHost>RFLevel
Default is 100, I set mine to 10 which is approximately 1milliwatt and works fine in my application.
Default is 100, I set mine to 10 which is approximately 1milliwatt and works fine in my application.
Important :: I’ve notice the changes take place after a reboot.
https://groups.io/g/PiStar
****** share this with others *******
No comments:
Post a Comment
.
PiStar Users Discussion Group
Pi-Star Users Support Group
https://groups.io/g/PiStar
BrandMeister Network Users Discussion Group
https://groups.io/g/BrandMeister
.
Note: only a member of this blog may post a comment.