Pi-Star DMR Configuration
DMR+ Network: Options
Configuration ::
DMR+ Master – Choose a nearby master server.
DMR+ Network – Set up any options you want to use 1.
DMR+ Network: Options
Configuration ::
DMR+ Master – Choose a nearby master server.
DMR+ Network – Set up any options you want to use 1.
Note 1: If you don't want to auto-connect to a talkgroup (when Pi-Star is set up as a hotspot),
use: StartRef=4000;RelinkTime=60;UserLink=1;TS1_1=9;
Note 2: If you turn off DMR Mode via MMDVMHost Configuration, these options aren't saved.
When you turn on DMR Mode again with DRM+ or DMRGateway set as the DMR Master, you'll need to re-enter these options.
Pi-Star DMR Configuration
DMR+ Network: Options
Pi-Star Users Support Group
https://groups.io/g/PiStar
****** share this with others *******
When you turn on DMR Mode again with DRM+ or DMRGateway set as the DMR Master, you'll need to re-enter these options.
Pi-Star DMR Configuration
DMR+ Network: Options
Pi-Star Users Support Group
https://groups.io/g/PiStar
****** share this with others *******
This is ridiculous, it should be possible to save the StartRef. Someone needs to add a few lines of code to the prog.
ReplyDelete