Pi-Star DMR Configuration - DMR+ Network: Options

Pi-Star DMR Configuration
DMR+ Network: Options

Configuration ::
DMR+ Master – Choose a nearby master server.

DMR+ Network – Set up any options you want to use 1.

Note 1: If you don't want to auto-connect to a talkgroup (when Pi-Star is set up as a hotspot),

use: StartRef=4000;RelinkTime=60;UserLink=1;TS1_1=9;

Note 2: If you turn off DMR Mode via MMDVMHost Configuration, these options aren't saved.

When you turn on DMR Mode again with DRM+ or DMRGateway set as the DMR Master, you'll need to re-enter these options.

Pi-Star NXDN is OFF Line

My Pi-Star shows Green [Mode Enabled] but Red under [Network Status]

Please wait for CODING CHANGES -  PISTAR and NXDN is under development March / April 2018

Pi-Star NXDN is OFF Line

RX NXDN but NO TX

I hear RX NXDN users but it doesn’t hear my transmissions.
Before I mess with RxOffset I think this is a issue that needs attention first.

ANSWER ::

Change the RxOffset setting adjust 

Updates and Changes to Jessie Pi-Star

Updates and Changes to Jessie Pi-Star

Andrew Taylor
Admin · March 17 at 8:39am

With the release of the Pi3 B+ there have been a number of changes to Stretch to support the new board, those changes have not (yet) propagated to Jessie (Pi-Star 3.x is based on Jessie).

However I know a number of you already have Pi 3B+ boards, so I have made a custom image to support these, the kernel is *not* upgradable on this image, please keep that in mind if you choose to use it.

Pi-Star v4.x is built on Stretch, it will support these boards better and apart from a passing resemblance to the current chain, its a very different animal - I hope this beta build will keep you going until we can get 4.x out of the door.

removed raspi-config

removed raspi-config

It was removed long ago

Motorola XTS3000 audio problem on P25 and the hotspot and audio - Resolved

Motorola XTS3000 audio problem on P25 and the hotspot and audio - Resolved

the BER was :  9.8%
with adjustment reduced to :  0.2%

Setup WPA over SSH

How-To for setting up WPA over SSH, for those times when the Web Portal just won't work out for you....

1. SSH into your Pi, using the username of 'pi-star' and either the default password of 'raspberry' or your own password if you changed it on the dashboard.

PI-STAR mobile Free Hotspots

PI-STAR mobile Free Hotspot

My solution for using pi-star at mobile FREE wifi mobile hotspots while travelling

Understood when travelling and maybe using free wifi to connect a hotspot.

Outlined is an example of how to transfer the "wpa_supplicant.conf" file with wifi setting onto a SDcard and moved to the hotspot device.  To activate that device on free wifi ie.coffee shop.

JumboSpot Pi-star Settings

JumboSpot Pi-star Settings

I have acquired a Jumbo Spot 17 board to try on Pi Star, there is a sticker on it saying RXOFFSET=500 TXOFFSET=500
P25 OFFSET=+200.

I have put the 500 offset in RX and TX in MMDVM Host in expert mode, but what is the P25 offset referring to ?

It doesn't say TX or RX, there is another RXD and TXD offset setting, does it refer to this I wonder.

Pi-Star Users Support Group

Pi-Star Users Support Group
https://groups.io/g/PiStar

https://groups.io/g/PiStar

Setup URL Pi-Star Digital Voice Dashboard for on a domain

Setup URL Pi-Star Digital Voice Dashboard for on a domain

Here are some basic instructions:
Optionally, if you want a domain name, rather than entering an IP address, you need to buy a domain name from someone. There are tons of places to buy one from. 

I mostly used 

DStar on the Pi Star image

DStar on the Pi Star image

Pi Star Latest Changes and update 2017

Pi Star Latest Changes 17 August 2017

 

PI-Star Wifi SSID not visible disabled - Hidden SSID

PI-Star Wifi SSID not visible disabled - Hidden SSID


So what I have found Pi-Star does not seem to find the WIFI SSID if it is disabled or if SSID is hide

I'm start working with a raspberry pi and I'm dealing with a WiFi network that is not available everytime. This means that there might be a period of 30 seconds, let's say, during which the network is available and in the following seconds it is not.

Which steps should I take to ensure that my raspberry pi automatically connects when the WiFi network is available?

Pi-star Privacy

As we understand that all hotspots shares the frequency, model, firmware and the IP address that it uses for the connection.

For many this is acceptable.

So a question the creator of Pi-Star interface about Privacy?